Handle Securing Section There are six installation points on the ceiling surface and the base surface. This allows installation of the optional handles (ELPMB56) and the metallic mounts prepared by the customer. Screw tightening torque: 12.5 ±0.5 Nm M8 Space Built-in nut (Screw dimensions) 8 mm 13 mm 11.5 mm Largest screw hole depth Screw tightening torque: 12.5 ±0.5 Nm M8 Built-in nut (Screw dimensions) Space 13 mm 14.5 mm 11.5 mm Largest screw hole depth When handles are installed on the top and bottom of the projector, you can install the projector vertically and perform portrait projection.
When performing portrait projection, make sure you remove the projector feet and screw them into the holes next to the handles. Do not install anything other than the projector's feet (such as metallic mounts and so on) in these holes. 10