Note the following points when installing a projector directly on top of another. This projector can be installed on top of another projector that has the carrying handle (ELPMB56) attached to the top. Do not stack three or more projectors (you can stack up to two projectors). Install the feet in the indentations on the top at the four corners. Do not remove the feet on the bottom of the projector. Cautions on Lifting To lift the projector, attach eye bolts to the four points on the same surface of the projector. Attach the eye bolts to the following points.
When attaching directly to the projector Use four commercially available eye bolts M8 (ankle length 11 to 16 mm) and attach them to the four screw holes for eye bolts. When attaching to the handle Use four commercially available eye bolts M10 (ankle length 11 mm or more) and attach them to the four screw holes for eye bolts on the handle. 11