Monitoring and Control You can check the status of networked projectors and perform various projector operations using these methods. 21 Method Details ESC/VP21 command You can control the projector from an external device using ESC/VP21. Epson Web Control By using the Web browser of a computer connected to the projector on a network, you can operate the projector or edit your playlists. You can also operate the projector or edit your playlists from a mobile device using the Epson iProjection (iOS/Android) app. PJLink command The projector complies with the PJLink Class2 standard established by the JBMIA.
From a computer connected to the projector on a network, you can control the projector with PJLink commands. For more details on PJLink, see the following Web site. http://pjlink.jbmia.or.jp/ Art-Net command Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the projector by using a DMX controller or an application system. Epson Projector Management Allows you to control multiple Epson projectors on a network. You can download Epson Projector Management from the following Web site. epson.sn/ Crestron Connected If you are using the Crestron Connected network monitoring and control system, you can set up your projector for use on the system.
For additional information on Crestron Connected, visit the Crestron Web site. https://www.crestron.com/products/line/crestron-connected Web API You can control the projector through Web API communication using API authentication (Digest authentication). For more details, see Web API Specifications for Projectors on the following website. epson.sn/