ESC/VP21 Commands When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command. If the command being processed terminates abnormally, an error message is output and a ":" is returned. The following commands are available. Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit. Contact Epson for more details. PJLink Commands The port number used for the PJLink search function is 4352 (UDP).
You need to make network settings before you can use PJLink. See the User's Guide for more details on network settings. It complies with all commands except for the following commands defined by PJLink Class2, and agreement was confirmed by the PJLink standard adaptability verification.
Non-compatible commands Input ports and corresponding input source number Manufacturer name displayed for "Manufacture name information query" EPSON Model name displayed for "Product name information query" EPSON EV115/EV110 22 Function Command Power On PWR ON Off PWR OFF Signal selection HDMI SOURCE 30 LAN SOURCE 53 SD player SOURCE 57 Spotlight SOURCE 58 A/V mute On MUTE ON Off MUTE OFF Function Command Mute settings Image muting set AVMT 11 Audio muting set AVMT 21 Input port name Input source number HDMI 32 SD player 43 Spotlight 44 LAN 52