Epson L-6034VW Operation Guide Introduction Control panel The control panel is composed of the main panel (front right) and the sub panel (front left). Sub panel Main panel 10 Letter Name Explanation a EMERGENCY STOP switch Push to immediately stop the press. The corona treater and the additional UV lamp curing unit also have an EMERGENCY STOP switch. b Feed Ready switch Turns the tension for the entire substrate feeder ON/OFF. c Rev. Feed switch Winds up the substrate while pushed down. d Slow Rev. Feed switch Slowly winds up the substrate while pushed down. e Slow Feed switch Slowly feeds the substrate while pushed down. f Feed switch Feeds the substrate while pushed down.
g Power lamp Lit when the breaker is on. h Pause switch Push to pause printing. i Start switch Push to start printing. j Feed Ready switch Turns the tension for the rewinder axis ON/OFF. k PC Only switch Push to process print data, such as half-tone processing, without printing. Use this when processing large amounts of images of print data for variable printing and so on. l Key switch Changes the status of the press. m UPS lamp When the Power lamp and the UPS lamp are on, the press is on and power is being supplied from an uninterruptable power supply. When the Power lamp is off and the UPS lamp is on, the press is off but power is being supplied from an uninterruptable power supply.