Epson L-6034VW Operation Guide Introduction External Image from the Rear 9 Letter Name Explanation a Main unit exhaust duct Exhausts heat generated in the main unit. Make sure this exhausts to outside the building. b Additional UV lamp curing unit duct Exhausts ozone and heat that are generated by the additional UV lamp curing unit. Make sure this exhausts to outside the building. c Additional UV lamp curing unit breaker Turns the additional UV lamp curing unit ON/OFF. d Main unit breaker Set to ON to supply power to the press. Set to OFF to stop the power supply to the press. e Left rear cover Open when performing maintenance. f Right rear cover Open when performing maintenance.
g Top rear cover Open when performing maintenance. h Network connector Connect the network cable. i Regulator Adjusts the air pressure for the connected air gun. Use the two air guns to fix the substrate for the unwinder and rewinder axis.