Network Guide Using the Product over a Network B For Windows 7: Click Start , Computer , and then Network . For Windows Vista: Click Start and then Network . C Right-click the product icon, then click Install . Click Continue in the User Account Control dialog box. Note: ❏ The icon shows the network product name (e.g., EPSONXXXXXX (your product name)). The product name can be confirmed on the product’s control panel or a network status sheet. For details on confirming on the control panel or printing a network status sheet, see “Displaying the network status and printing a network status sheet” on page 21 .
❏ If Uninstall appears instead of Install , click Uninstall once and retry (for Windows 7 and Vista). D Click Your devices are ready to use ( Your device is ready to use ). Note: Note for Windows 7 users: Skip steps 4 and 5. E Check the screen and click Close . F For Windows 8: Select Desktop > Settings charm > Control Panel , and then select View devices and printers . For Windows 7: Click Start and then Devices and Printers . For Windows Vista: Click the Start button, and then Network . Note for Windows 8 users: Follow the steps below if you cannot find the product icon. 1. Select Add a device . 2. Select your product, and then select Next . 3. Follow the on-screen instructions.
G Verify that an icon with the network product name (e.g., EPSONXXXXXX (your product name)) is added. To print using WSD, select the product by its network product name. Note: ❏ To use the scanner function with WSD, use Windows Fax and Scan or Paint in Windows 8.1/8/7/Vista. ❏ The scanner name selected with Windows Fax and Scan or Paint in Windows 8.1/8/7/Vista is the same as the network product name. ❏ When using commercially available software, see the User’s Guide that came with the software for the scanning procedure. 10