Network Guide Using the Product over a Network Note: ❏ Before beginning setup for a computer, check that your network devices such as the router, wireless adapter, or hub are working properly and remove the memory card from the product. ❏ If the security alert screen for your OS or the application appears, click Unblock or Allow to create a Firewall exception. Do not click Keep Blocking , Block , or similar command on commercially available security software screen. Depending on the commercially available security software used, the above procedure may not establish a connection. In this case, temporarily exit the security software and then use the product’s software.
A Turn on the product and make sure that your Wi-Fi/Ethernet is working normally. B Insert the software disc into the CD-ROM/DVD drive. Note: If the installation screen does not automatically appear in Windows, double-click the Disk icon in Computer (or My Computer ). C Follow the on-screen instructions. Setting up using WSD (for Windows 8.1/8/7/Vista) The product supports Web Services on Devices (WSD). WSD is useful when you want to add a second computer to the network to which the product is connected, or to set up multiple computers at the same time. Note: ❏ To set up a printer/scanner with WSD, the computer and product must be connected to the network.
For details on setting up a network connection from a product’s control panel, see “Connecting the Product to a Wi-Fi Network Manually” on page 12 . ❏ You must install the driver before setting up the printer/scanner with WSD. A Verify that the product is turned on. Note: SinceWindows 8.1/8 installs the WSD driver automatically, you can skip steps 2 to 5. 9