Network Guide Using Product via Network D Select System Preferences from the Apple Menu. E Click the Print & Fax (10.5.x, 10.6.x) or Print & Scan (10.7.x or later) icon. F Click + under the Printers list. G For Mac OS X 10.5.x/10.6.x : Select the product name that you want to connect. For Mac OS X 10.7.x or later : Select the product name that you want to connect, and then select the Epson product name on the Use menu. H Click Add . Note for Mac OS X 10.6.x or later users: The printer driver is automatically downloaded by the Apple Software Updater. I Make sure your product is in the Printers list. You can now use the product from your computer.
If your product is a multifunctional printer equipped with a scanner, follow the steps in the next section to connect the scanner to a network. Connecting a scanner to a network Follow the steps below to use a scanner from a computer by using EPSON Scan. Note: This feature is not available for all products or may not be enabled. A Download “EPSON Software Updater” from the following link. http://support.epson.net/dnavi/ B Launch “EPSON Software Updater”. Available software is displayed as a list. C Select EPSON Scan , and then click Install . Epson Scan is downloaded and installed. D Double-click Macintosh HD , Applications , Epson Software and then EPSON Scan Settings . Note:
If the scanner is listed but cannot be selected immediately after the EPSON Scan Settings screen appears, wait for the search to end. E Verify that the scanner is selected, select Network and then click Add . 10