Network Guide Using Product via Network F Enter the Scanner Name , and wait for the search to end. G Select the scanner’s IP address, then click OK . Note: If the address does not appear, check the connection and click Retry , or click Enter address and directly enter the IP address. Entering the IP address directly disables the IP address auto-follow function. H Select the scanner, then click Test . I Verify that The connection test was successful and the scanner name are displayed, then click OK . Smartphone or tablet Follow the steps below to use the product from an iOS or Android smartphone or tablet. Note:
❏ The following features are not available for all products or may not be enabled. For details on available functions, see your regional Epson Web site. ❏ Check that your smartphone or tablet is connected to the network before connecting to the product. ❏ If you want to use a product that only has an Ethernet function from a smartphone or tablet, connect the product to the wireless router (access point) using a LAN cable. Using Epson iPrint Epson iPrint allows you to wirelessly print and scan to your product from your smartphone or tablet (iOS/Android).
A Set up your product for wireless printing as described on the Start Here sheet, and then connect the product to a Wi-Fi network manually by using the product’s control panel. For more information on using the product’s control panel, see “From the Product’s Control Panel” on page 12 . B Download “Epson iPrint” from the App Store (iOS) or Google Play (Android) to your smartphone or tablet. You can also download Epson iPrint from the following Epson Web site. http://ipr.to 11