User's Guide Scanner Basics Buttons and Lights on the Control Panel Buttons 12 A Power button Turns the scanner on or of.f B Wi-Fi connect button Press the WPS button on the access point, and then press the button for more than three seconds to connect to a Wi-Fi network. See the chapter “Network Settings” for more details. Press the button to cancel the settings. C Wi-Fi on/off button Press this button for more than three seconds to turn off the wireless signal. Press again to turn on the signal. D Double feed detection skip button Normally, an error occurs when detecting double feeds when loading envelopes, plastic cards, originals with labels or stickers, and so on.
Press the button before scanning to skip this error once (one sheet). The light is on when this is enabled. Follow the steps below to restart scanning when a double feed error has occurred (the error light fal shes). 1. Open the scanner cover, and then remove the originals. 2. Close the scanner cover, and then press the button. 3. Load the originals. 4. Restart scanning by pressing the start button or the software button. E Slow mode button Slow down the feeding speed when scanning. The light is on when this is enabled. Press this button in the following situations: ❏ when originals jam frequently ❏ when loading thin originals