User's Guide Scanner Basics Additional functions are available with different combinations of buttons. Related Information & “Network Settings” on page 67 & “Placing Plastic Cards” on page 31 & “Placing Laminated Cards” on page 34 & “Placing Envelopes” on page 46 & “Cleaning Inside the Scanner” on page 73 & “Scanning from Smart Devices Using NFC Tag” on page 65 Lights 13 F Stop button ❏ Cancels scanning. ❏ Finishes Automatic Feeding Mode. ❏ Cancels Wi-Fi settings by push button setup (WPS). ❏ Press this to release the error when a network connection error occurs. ❏ Cancels a frimware update over a network connection. G Start button ❏ Starts scanning.
❏ Press this when cleaning the inside of the scanner. H NFC tag Hold a smart device over this tag to scan directly from the smart device. + Hold down the and buttons for more than three seconds to start PIN Code Setup (WPS). See the chapter “Network Settings” for more details. + Turn on the scanner while holding down the button to restore the default network settings. A AP mode light Indicates that the scanner is connected wirelessly in AP mode.