Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET27 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ^S(C PC Set image correction Sets correction for image to be printed (saturation, type of color correction, ink profile level correction value, tone (yellow), tone (magenta), tone (cyan), contrast, ratio of black to composite, print quality, or brightness). Printer setting ^S(CPC,b,c b=A:
Saturation -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 Low b=C: Type of color correction c = ASCII single character c = D/N/V D: None N: Epson preferred color V: Epson vivid color N b=D: Ink profile level correction value -9999 ≤ c ≤ 9999 -6 ≤ c ≤ 4 0 b=L: Tone (yellow) -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 b=M: Tone (magenta) -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 b=N: Tone (cyan) -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 b=O: Contrast -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 b=P: Ratio of black to composite -9999 ≤ c ≤ 9999 -6 ≤ c ≤ 0 0 b=Q: Print quality ASCII single character c = D/S/N/Q/M D: Max Speed S: Speed N: Normal Q: Quality M: Max Quality Depends on the media coating type b=R:
Brightness -99 ≤ c ≤ 99 -25 ≤ c ≤ 25 0 ^S(C UB Set buzzer Sets the buzzer settings for printing operations, as well as the volume level. Printer setting ^S(CUB,b,c b=E: Enable/disable buzzer sound after error c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled E Low b=F: Enable/disable continuous buzzer sound after error c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled D b=S: Buzzer timing c = N/E/L N: None E: Each label L: Last label c = N/E/L N: None E: Each label L: Last label None b=Z : Buzzer volume c = N/S/M/L/X N: OFF S: Soft M: Medium L: Loud X: Max c = N/S/M/L/X N: OFF S: Soft M: Medium L: Loud X: Max X ^S(C UI Enable/disable button Enables/disables buttons.
Control panel ^S(CUI,b,c b=B: Enable/disable cancel button c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled E ^MP Low b=C: Enable/disable cut button c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled E b=F: Enable/disable feed button c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled E ^MP b=P: Enable/disable pause button c = E/D E: Enabled D: Disabled c = E/D E: Enabled D: Disabled E ^MP