ESC/Label Command Reference Guide Rev. L Page 216 LR Resolution setting B = Background image rendering resolution [dpi] 200/300/600 None M = Print resolution magnification A/B A: Normal resolution B:
Low resolution ^JM P = Print resolution [dpi] 200/300/600 ^MU R = Format base in dots per inch [dpi] 150/200/300/600 ^MU Z = Print resolution of replaced printer [dpi] 200/300/600 None LS Media settings G = Left gap [dot] ([mm])¹ 0 to 9999 None L = Label length [dot] ([mm])¹ 0 to 99999 None P = Label width [dot] ([mm])¹ 0 to 9999 None R = Right gap [dot] ([mm])1 0 to 9999 None T = Distance from the hole to the media edge [dot] ([mm])1 0 to 9999 None C = Distance between labels [dot] ([mm])¹ 0 to 9999 None LV Media size error H = Media size error (width) detection E/D E: Enabled D: Disabled None V = Media size error (length) detection E/D E: Enabled D:
Disabled None