ESC/Label Command Reference Guide Rev. L Page 217 LW Margins B = Bottom margin [dot] ([mm])¹ 0 to 9999 None L = Left margin [dot] ([mm])¹ 0 to 9999 None R = Right margin [dot] ([mm])¹ 0 to 9999 None T = Top margin [dot] ([mm])¹ 0 to 9999 None MF Set feed operation P = Operation at power on C/F/G/L/N/S C: Calibration F: Feed G: Feed and cut L: Measure media length N: No feed S: Short calibration ^MF H = Operation at change media C/F/G/L/N/S C: Calibration F: Feed G: Feed and cut L: Measure media length N: No feed S: Short calibration ^MF S = Paper suction strength E/D E: Enabled D:
Disabled None M = Manual paper suction strength 1 to 10 None B = Set backfeed procedure b = A/B/N/10 to 90 A = 100% backfeed after cutting B = 0% backfeed after cutting N = 90% backfeed after cutting 10 to 90 = Percent value ~JS G = Distance between the head and the media 1 to 255 None