^BA [Name] Code 93 barcode [Format] ^BA o ,h ,i ,a ,c [Function] Sets Code 93 barcode to the field. Sets the field orientation based on Parameter o. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. Sets the check digit printing based on Parameter c. [Encoding] Numerals (0 to 9), capital letters of the alphabet (A to Z), hyphens , periods , dollar symbols , slashes , plus symbols , percent symbols , and blank spaces can be encoded.
If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. The check digit is added automatically. The check digit is calculated by modulus 47. The start and stop codes are printed as squares for HRI characters. All ASCII code (128 types) can be specified in the field data using a combination of shift codes and characters. ESC/Label Command Reference Guide Rev. L Page 61 Parameters Description Definition range o Code 93 field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B:
270° rotation (clockwise) h Code 93 barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for Code 93 i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of Code 93 barcode a = Y/N Y: Set N: Cancel c Set/cancel check digit printing for Code 93 c = Y/N Y: Set N: Cancel