The die-cut label layout is shown below. Figure 4.3.2-2 Die-cut label layout Table 4.3.2-2 List of die-cut label setting values Epson ESC/Label Application Development Guide CW-C4000 Series Rev. C Page 21 Item Setting range Recommended initial value Command Width [mm] 21.4 to 108.0 108.0 ^S(CLS,P Length [mm] 8.0 to 406.4 174.8 ^S(CLS,L Gap between labels [mm] 2.0 to 6.0 3.0 ^S(CLS,C Left gap [mm] 2.0 2.0 ^S(CLS,G