3.3.3 Command Configure the print settings and register the graphics that are common to a batch. [Setting commands for each printing job] ^XA ^IDR:*.*^FS Delete files registered previously ^S(CLR,R,600 Set format resolution to 600 [dpi] ^S(CLR,P,600 Set print resolution to 600 [dpi] ^S(CLR,Z,600 Set printer resolution before replacement to 600 [dpi] ^S(CLS,P,2400^S(CLS,L,2400 Set printable area to 101.6 [mm] x 101.6 [mm] ^S(CLS,C,71 Set gap between printable area to 3 [mm] ^S(CLS,G,48 Set left gap to 2 [mm] ^S(CLS,R,48 Set right gap to 2 [mm] ^S(CLM,T,M1 Set media coating type to Matte Paper ... Other settings are omitted ^XZ [Image registration commands] ~DYR:BASEIMG,B,P,430267,0, .PNG...
Register images that are common to the batch Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 13