System Messages - Alphabetical List *Stopped due to servoing error* (-600) Explanation: Program execution has stopped because of one or more servo errors. User action: Correct the source of the reported servo errors, referring to your system hardware manual as required. *Storage area format error* (-305) Explanation: During execution of a FREE command, eV+ has detected that programs or data in RAM may have been corrupted. This may have been caused by a momentary hardware failure or a software error. User action: Attempt to save as much as possible onto the disk. Then enter a ZERO command or power down the controller and restart the system.
*Straight-line motion can't alter configuration* (-612) Explanation: A change in configuration was requested during a straight-line motion. This is not allowed. User action: Delete the configuration change request, or use a joint-interpolated motion instruction. *String too short* (-417) Explanation: A program instruction or command expected a string argument with a certain minimum length and received one that was too short. User action: Review the syntax for the program instruction and edit the program to pass a string of the correct length. *String variable overflow* (-416) Explanation:
An attempt has been made to create a string value that is greater than the maximum string length of 128 characters. User action: Edit the program to generate strings of the proper length. *Subdirectory in use* (-547) Explanation: An attempt has been made to delete a subdirectory that still contains files or that is being referenced by another operation (for example, an FDIRECTORY command). User action: Make sure that all the files within the subdirectory have been deleted. Make sure that no other program tasks are referencing the subdirectory. Retry the delete operation. eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 652