NET monitor command Details This command displays information about the network service protocols that are currently installed and are available. These include AdeptTCP/IP and AdeptFTP. The command also displays the local IP address (i.e., the address of the controller). There can be any one of four states (three in the case of AdeptFTP): eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 136 Value of mode Description Packets transmitted: 105007 Packets received: 577875 Transmission errors: 0 Reception errors: 6 Missed packets: 0 Reception framing error: 0 Reception CRC error: 3 Reception overflow: 3 Reception buffer error: 0 Transmission late collision:
0 Transmission loss of carrier: 0 Transmission retry error: 0 Transmission buffer error/underflow: 0 Available TCP connections: 32 Mount Node Path XC ASERVER C:/ADEPT/DISKS/DISK C _ 2 Display network status and IP addresses of the defined nodes: .NET 2 TCP/IP: Up FTP: Option installed Name IP address ASERVER 192.9.222.252