NET monitor command If TCP is in the Up state, additional information is also displayed as shown in the following example. Examples If TCP is in the Up state, the following appears: Local IP address address Packets transmitted count Packets received count Transmission errors count Reception errors count Missed packets count where address is a dotted-decimal IP address and count is a number. The following additional output is displayed only if mode is specified with a nonzero value.
Reception framing error count Reception CRC error count Reception overflow count Reception buffer error count Transmission late collision count Transmission loss of carrier count Transmission retry error count Transmission buffer error/underflow count The number of available TCP connections is displayed. Related Keywords NETWORK real-valued function eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 137 State message Explanation Up For AdeptTCP/IP this indicates that the network has initialized successfully and is running. Option installed The software option is installed, but the protocol is not currently active. Hardware not installed The Ethernet cable is not connected.