STATUS monitor command STATUS monitor command Syntax STATUS select Function Display status information for the system and the programs being executed. Usage Considerations The STATUS command can be used at any time to determine the status of the system. Parameter select Optional real value, variable, or expression (interpreted as an integer) that selects the information to be displayed. If this parameter is omitted, the status of all the program tasks is displayed one time. If the value of "select" is zero or positive, it must correspond to one of the program tasks provided by the system. Then the status of that program task is displayed one time. NOTE:
The number of program tasks available with a particular system depends on the system type and configuration. See the eV+ Operating System User's Guide for details. Details If the "select" parameter is omitted the status of all program tasks is displayed. Status Display The first line of the display appears only in systems equipped with a robot (refer to Status Display). The following are the possible status messages for the "ROBOT:" field of the display: eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 163