System Messages System Messages While the eV+ system is being used, it is possible for hardware and software errors to occur. For example, if commands or instructions are not entered in the correct way, the system rejects the input. The usual response is to output an error message to the system terminal indicating what is wrong so that the user can correct the error. When using the ACE software to program and interface with the eV+ system, error messages are reported in that interface, usually in the form of pop-up windows. These windows typically contain the error message along with a Details button that can be selected for more information.
The message and details can also be copied to the Windows clipboard and then pasted in an email or other document. Error Messages The eV+ Language Reference Guide contains descriptions of the eV+ error messages and suggests remedies to correct the problems. NOTE: If the system has more than one robot connected and an error is associated with a specific robot, the robot number is appended to the error message in the form "(Robot #)". eV+Operating System User's Guide, v2.x, 18320-000 Rev A Page 66