Additional Information This manual does not provide operation, installation, and wiring methods for each device. For details, refer to manuals noted in Related Manuals. 19 The right dialog will be displayed, select “SYSTEM SECTION” in the “Section” area and “ipaddress” in the “Statements” area and click [Edit]. The right dialog will be displayed, change the ipaddress and click [Accept]. Set the IP address not to overlap with other devices. Change the IP address of the PC again based on the changed one for the robot controller. 7 Reconnect to the robot controller. 8 Right-click “V+ User Module” in the Workspace Explorer and select “Load from V+ File”.
Select OmronAdept FHRobotLib, _ OmronAdept FHRobotSample _ in the folder outputted by using the data set output tool for the robot vision. 9