beckhoff TF5200 — 5 Parameter

Parameter CNC objects TF5200 | TwinCAT 3 CNC Insert stop command 27 Version: 1.141 HLI SC OVERRIDE RAPID ZERO _ _ _ _ 0x0080 Override = 0 with rapid traverse blocks HLI SC DELAY TIME _ _ _ 0x0200 Dwell time. HLI SC CHANNEL SYNC _ _ _ 0x0800 Channel synchronisation is active. HLI SC IPO INPUT EMPTY _ _ _ _ 0x1000 Input FIFO of the interpolation is empty. HLI SC IPO INPUT DISABLED _ _ _ _ 0x2000 Input of function blocks (e.g. motion blocks etc.) disabled. HLI SC WAIT FOR AXES _ _ _ _ 0x8000 Stop occurs due to waiting until a commanded axis swap is completed. HLI SC CHANNEL ERROR _ _ _ 0x00010000 An error occurred in the channel.

HLI SC WAIT TECHNO ACK _ _ _ _ 0x00020000 Waiting for acknowledgement of M/H/ST technology functions. HLI SC W C AFTER COLLISION _ _ _ _ _ 0x00040000 After a detected collision, waiting for motion resumption. HLI SC SLOPE SUPPLY PROBLEM _ _ _ _ 0x00080000 Block supply problem (only occurs in conjunction with HSC slope). HLI SC BACK INTERPOLATION _ _ _ 0x00100000 Back interpolation after tracking mode is active. HLI SC STOP REVERSIBLE _ _ _ 0x00200000 Stop since M00 (programmed stop) is active. However, the NC program can be processed backwards despite M00 (available as of V3.1.3039.01).

HLI SC BREAKPOINT STOP _ _ _ 0x00400000 Stop after a breakpoint (stop point) is reached; available as of V3.1.3039.01. HLI SC M0 STOP _ _ _ 0x02000000 Stop after an M00 function is reached HLI SC M1 STOP _ _ _ 0x04000000 Stop after an M01 function is reached HLI SC INSERT STOP AT DIST _ _ _ _ _ 0x08000000 Stop after an M function inserted by the Control Unit “Inserting stop marks” is reached. HLI SC DEC SYN CHAN EMPTY _ _ _ _ _ 0x10000000 Decoder is waiting for synchronisation. NC channel has no job. HLI SC WAIT FOR ADD IFC _ _ _ _ _ 0x20000000 Stop because waiting condition is active in the additive interface (3D distance control).

HLI SC WAIT FOR AXIS DIST CTRL _ _ _ _ _ _ 0x40000000 Stop because waiting condition is active in the distance control (2D). Name bahn state.stop conditions r _ _ _ Description Displays the condition why the current motion was stopped. The value read can be seen in the table [} 26]. Task GEO (Port 551) Index group 0x12330 ID Index offset 0x30 Data type UNS32 Length 4 Attributes read Unit [-] Remarks Alternatively, the stop condition can also be read by the HLI [} 26].