Getting Started TT 10 Dog Collar Device WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Alpha System NOTICE Avoid using a high-powered radio (greater than 5 watts) in close proximity to the device. It may cause irreversible damage to the device. Before you can use the Alpha handheld device and the TT dog collar device, you must set up the devices. 1 Install the battery in the handheld device ( page 1 2 Charge the handheld device ( page 2 3 Charge the collar ( page 2 4 Turn on the devices ( page 2 5 If necessary, add the collar to the handheld device ( page 3 6 Acquire satellite signals ( page 2 7 Attach the collar ( page 4 Device Overviews Alpha 100 Handheld Device Getting More Information You can find more information about this product on the Garmin ® website. Go to www.garmin.com/alalpha Go to www.garmin.com/ououtdoor Go to www.garmin.com/lelearningcenter Go to http://buy.garmin.c.com , or contact your Garmin dealer for information about optional accessories and replacement parts. Registering Your Device Help us better support you by completing our online registration today. Go to http://my.garmin.c.com Keep the original sales receipt, or a photocopy, in a safe place. Installing the Battery in the Handheld Device WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. 1 Turn the D-ring counter-clockwise, and pull up to remove the cover. 2 Locate the metal contacts on the end of the lithium-ion battery. 3 Insert the battery into the compartment, contacts first. Getting Started 1 À VHF antenna Á GPS antenna  Power key à Contact points Ä Status LED and flashing beacon LEDs À GPS antenna Á VHF radio antenna  Training keys à Power key Ä Mounting spine Å microSD™ memory card slot (under battery) Æ Battery cover D-ring Ç Mini-USB port (under weather cap)