GE High Wall Duct-Free Air Conditioner User & Service Manual PDF (EN)

High Wall Duct-Free SYSTEM SAFETY INFORMATION. . . . . . . 3 OWNER’S MANUAL REMOTE CONTROL FEATURES AND SETTINGS. . . . . . . . . . . . . . . 4 EMERGENCY OPERATION AND MAINTENANCE . . . . . . . . . . . . . . 6 TROUBLESHOOTING TIPS . . . . 7 LIMITED WARRANTY. . . . . . . . . 8 Turbo Fan Heat Cool Dry Temp+ Swing Swing Temp- Health Quiet Extra Function Sleep Lock Light Reset F/C Confirm/Cancel GE is a trademark of the General Electric Company. Manufactured under trademark license. 49-5000277 Rev. 0 12-18 GEA 0011504293

Стр. 1

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them. Register your GE Appliances product now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owner’s Manual. 2 49-5000277 Rev. 0

Стр. 2

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE SYSTEM IMPORTANT SAFETY INFORMATION WARNING Keep batteries away from children. This remote controller contains batteries. If a new or used battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

The cells shall be disposed of properly, including keeping them away from children. Even used cells may cause injury. Record Keeping Thank you for purchasing this GE Appliances product. This owner's manual will help you get the best performance from your new heat pump. ____________________________________ Model number ____________________________________ Serial number ____________________________________ Date of purchase For future reference, record the model and serial number located on the label on the side of your heat pump, and the date of purchase. Staple your proof of purchase to this manual to aid in obtaining warranty service if needed.

To register your new GE Appliances Duct Free system go to GEAppliances.com/ductless and input the model/ serial number information on this page. To receive a 10-year compressor and parts warranty, registration is required within 60 days of installation. 49-5000277 Rev. 0 3 For your safety, the information in this manual must be followed to minimize the risk of fire, electric WARNING shock or personal injury. • Use this appliance only for its intended purpose as • G E Appliances does not support any servicing of the described in this Owner’s Manual. heat pump.

We strongly recommend that you do not • This heat pump must be properly installed in accordance attempt to service the heat pump yourself. with the Installation Instructions before it is used. • For your safety…do not store or use combustible • T urn the unit OFF and unplug your heat pump before materials, gasoline or other flammable vapors or liquids cleaning the air filter. in the vicinity of this or any other appliance. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do. • T hese R410A heat pump systems require contractors and technicians use tools, equipment and safety standards approved for use with this refrigerant.

DO NOT use equipment certified for R22 refrigerant only. WARNING

Стр. 3

REMOTE CONTROL FEATURES AND SETTINGS Remote Control Features and Settings Remote Control Temp + : Every time the button is pressed, the temperature setting increases. Temp - : Every time the button is pressed, temperature setting decreases. The operating temperature range is 60°F-86°F (16°C-30°C). 5. FAN SPEED Button FAN SPEED: For each press the fan speed changes as follows: Remote control: 7 1 8 6. DRY Button DRY mode is used to reduce humidity. In DRY mode, when room temperature becomes lower than temp. setting +2°F, unit will run intermittently at LOW speed regardless of FAN setting. The 2 6 will be displayed during DRY mode. 3 4 7.

FAN MODE Button FAN mode circulates air only; there is no temperature adjustment available. Use the fan speed button (5) to adjust fan speed from low, medium to high. Auto, Turbo and Quiet are not available. 10 11 9 5 8. TURBO Button The TURBO function is used for fastest air flow in Heating or Cooling modes. Control will display the TURBO icon [UP ARROW] on the bottom right side of the remote display. Pressing the TURBO button again or the FAN SPEED button will turn TURBO off. 14 16 12 15 17 19 9. Quiet Button The QUIET function switches the fan to the lowest speed. The control will display the QUIET icon [DOWN ARROW] on the bottom left side of the remote display.

Pressing the QUIET button again or the FAN SPEED button will turn QUIET off. 13 18 1. Power Button Press the ON/OFF button on the remote control to start or stop the unit. 10. Louver UP/DOWN Button Press the LOUVER UP/DOWN button to choose the position of the horizontal airflow louvers. Status display of air flow 2. COOL Button In COOL mode, the unit operates in cooling. When FAN is set to AUTO, the heat pump automatically adjusts the fan speed according to the room temperature. The COOL/DRY: will be displayed during COOL mode. HEAT: NOTE:

• It is advisable not to keep the vertical louver in the downward position for an extended period of time in COOL or DRY mode, otherwise condensate water may form on the louver. • When turning the unit on, the remote control will automatically return the louver to the previous set swing position. When turning the unit off, the louver will rotate to the full open position prior to closing. 3. HEAT Button In HEAT mode, warm air will blow out after a short period of the time due to cold-air prevention function. When FAN is set to AUTO, the heat pump automatically adjusts the fan speed according to room temperature. The will be displayed during HEAT mode. 4.

Temperature +/- Buttons 4 49-5000277 Rev. 0

Стр. 4