Table 7. Control panel error messages Message Cause Solution FAX RECEIVE ERROR An error occurred while trying to receive a fax. Ask the sender to resend the fax. Try faxing back to sender or another fax machine. Check that the telephone cord is securely connected by unplugging and replugging the cord. Check for a dial tone on the phone line by pressing F AX / S END . Make sure the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. FAX SEND ERROR An error occurred while trying to send a fax. Try resending the fax. Try faxing to another fax number.
Check that the telephone cord is securely connected by unplugging and replugging the cord. Check for a dial tone on the phone line by pressing F AX / S END . Make sure the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. GROUP DIAL NOT ALLOWED IN GROUP The speed-dial code you entered is programmed for a group. Adding a group-dial to another group-dial is not allowed. Enter one-touch keys (programmed as an individual speed dial) or speed-dial codes to a group-dial GROUP IS FULL. [FAX] TO START The maximum number of fax numbers that can be added to an ad hoc group is 20.
Resend to the ad hoc group using less fax numbers. IN CLEANING MODE. PLEASE WAIT 1-3 MIN. The product is running an internal cleaning cycle. Wait for the product to finish the cleaning cycle. The message will clear when the cycle is finished. INVALID DATE An invalid date was entered, such as June 35. Reenter the date. INVALID TIME An invalid time was entered, such as 25:99 PM. Reenter the time. JOB SETTINGS CLEARED The product has cleared job settings. Reenter any desired job settings. EN Control panel error messages 39