Chapter 2 Setting Up the GigE Camera When you select a Step in the Job List, all of its parameters are displayed in the properties window at the bottom of the main window. Click on the “Acquire” tab at the top of the properties pane, as shown here: FIGURE 2–16. Select a Step in the Job List If you look at the “Camera Number” parameter, you will see that “Camera1” is currently selected. This corresponds to the first GigE camera that was discovered when you started FrontRunner for the first time. Change the selection to “Camera 2” by clicking on the parameter and using the combo box that pops up. FIGURE 2–17. Change Camera Number 2-16 Getting Started with Visionscape GigE Cameras