Getting Started with Visionscape GigE Cameras (EN)

Getting Started with Visionscape® GigE Cameras

Getting Started with Visionscape GigE Cameras v9.2.0, July 2019 84-111015-02 Rev N

Стр. 1

Getting Started with Visionscape® GigE Cameras

Copyright ©2019 Omron Microscan Systems, Inc. Tel: +1.425.226.5700 / 800.762.1149 Fax: +1.425.226.8250 All rights reserved. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service Omron Microscan-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Omron Microscan. Throughout this manual, trademarked names might be used. We state herein that we are using the names to the benefit of the trademark owner, with no intention of infringement. Disclaimer The information and specifications described in this manual are subject to change without notice.

Latest Manual Version For the latest version of this manual, see the Download Center on our web site at: www.microscan.com . Technical Support For technical support, e-mail: helpdesk@microscan.com . Warranty For current warranty information, see: www.microscan.com/warranty . Omron Microscan Systems, Inc. United States Corporate Headquarters +1.425.226.5700 / 800.762.1149 United States Northeast Technology Center +1.603.598.8400 / 800.468.9503 European Headquarters +31.172.423360 Asia Pacific Headquarters +65.6846.1214

Стр. 2

Contents

Contents PREFACE Welcome v Purpose of This Guide v Conventions v CHAPTER 1 Before You Begin 1-1 Visionscape Hardware 1-1 Package Contents 1-2 Components 1-3 PC Requirements 1-4 CHAPTER 2 Setting Up the GigE Camera 2-1 Install Visionscape Software 2-2 Configure Gigabit Ethernet Adapter(s) In Your PC to Use Static IP 2-4 Connect Cables to Your GigE Camera(s) 2-8 Connect the GigE Camera(s) to Your PC 2-9 Take Your First Picture 2-10 General Location Considerations 2-17 Environmental Requirements 2-18 Getting Started with Visionscape GigE Cameras iii

Стр. 3

Contents

Contents CHAPTER 3 Advanced Tool Tutorials 3-1 Tutorial 1 — Defect Detection with Flaw Tool 3-2 Tutorial 2 — OCV Fontless Tool 3-13 Tutorial 3 — Data Matrix Tool 3-22 Tutorial 4 — Using Measurement Tools in an Inspection 3-29 Tutorial 5 — Using the Trajectory Step 3-43 APPENDIX A GigE Network Configuration A-1 Configuring Your Network Adapter for GigE Visionscape A-2 How to Modify the dm.config File to Change Camera and System Assignments A-16 Visionscape GigE Network Configuration A-41 iv Getting Started with Visionscape GigE Cameras

Стр. 4