Chapter 3 Advanced Tool Tutorials clipgood1.tif and click Open. This will load the file and its path into the File List. Note: This file was installed when you installed Visionscape. If you installed Visionscape to a location other than C:\Vscape, replace it with the appropriate drive and directory designation. 7. Right click Snapshot in the Step Tree (left pane) and select Insert Into to display the Insert Step window. Click on the Analysis Tools tab. Double click TwoPt Locator to add it to the Job. The TwoPt Locator tool locates the tips of the two prongs on the part. 8. Right click TwoPt Locator and select Insert Into to display the Insert Step window.
Double click Edge Tool to add it to the Job. The Edge Tool locates edge points that will fit the circle shape on the part. 9. Right click Edge Tool and select Insert Into. Click the Measurements tab. Double click LeastSquaresCircle Fit to add it to the Job. 10. Right click LeastSquaresCircle Fit and select Insert Into. Double click Tolerance Meas to add it to the Job. Rename Tolerance Meas to Circle Radius tolerance. To rename the step, place the cursor on Tolerance Meas and right-click. This displays the Step Context Menu. Select Rename and type Circle Radius tolerance. 11. Right click TwoPt Locator and select Insert Into. Click the Measurements tab.
Double click Dist2Pts Meas to add it to the Job. Rename Dist2Pt Meas to Pin to Pin Distance. This will identify the proper use of the tool to measure the distance between the tips of the prongs. 12. Right click Pin to Pin Distance and select Insert Into. Click the Measurements tab. Double click Tolerance Meas to add it to the Job. Rename Tolerance Meas to Pin to Pin Distance tolerance. This will be used to tolerance the measured pin-to-pin distance. 13. Right click TwoPt Locator and select Insert Into. Click the Measurements tab. Double click Dist2Pts Meas to add it to the Job. Rename Dist2Pts Meas to Left to Center.
This will measure the distance between the tip of the left prong and the center of the circle. 3-30 Getting Started with Visionscape GigE Cameras