1. In the Service Tests submenu, scroll to “12. Color Sensor Test” and press Enter . 2. The Printer will initialize the Color Sensor and the Front Panel will display the following messages: • Starting Sausalito. If there is a failure starting the Sausalito, the Front Panel will display System Error Code 01.0:10 . For more information on troubleshooting this error code, refer to page 47. • Starting Carriage. If there is a failure at this point, the Front Panel will display System Error Code 02.1:10 . For more information on troubleshooting this error code, refer to page 48. Check also System Error Code 11:10 (refer to page 51) or System Error Code 01.0:10 (refer to page 47). • Starting Nvm.
• Getting Part Number. If there is a failure at this point, the Front Panel will display System Error Code 79:03 . For more information on troubleshooting this error code, refer to page 72. • Getting Scan Axis Size. If there is a failure at this point, the Front Panel will display System Error Code xx:xx . For more information on troubleshooting this error code, refer to page 72. • Starting Service Station. If there is a failure at this point, the Front Panel will display System Error Code 21:10 . For more information on troubleshooting this error code, refer to page 52. • Starting Scan Axis. If there is a failure at this point, the Front Panel will display System Error Code 42:10 .
For more information on troubleshooting this error code, refer to page 60. Tests and Utilities • Homing Scan Axis. If there is a failure at this point, the Front Panel will display System Error Code 42:10 . For more information on troubleshooting this error code, refer to page 60. • Homing Service Station. • Moving Carriage out of Service Station path. • Starting Servicing Services. • Starting Color Sensor. • Starting Color Sensing. • Reading SOL status. 120 Chapter 4 Service Tests and Utilities