Scan-Axis Motor Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Left Cover ⇒ See page 270. 3. Remove: • For the 42-inch model, the Left Connector Cover ⇒ See page 287. • For the 60-inch model, the Electronics Module Extension ⇒ See page 288. 4. Uncap the Carriage Assembly by manually pulling out the Printhead Maintenance Cartridges tray. Removal & Installation 5. Lift the Primer and hold the Primer to its maximum position to avoid damaging it when you move the Carriage Assembly in the next step. 346 Chapter 8 Removal & Installation