Table 25. Configuration menu (continued) Item Values Explanation CLEARABLE WARNINGS=JOB JOB ON Set the length of time that a clearable warning appears on the printer control panel. JOB : Warning messages appear on the control panel until the end of the job from which they were generated. ON : Warning messages appear on the control panel until G O is pressed. AUTO CONTINUE= ON ON OFF Determine how the printer reacts to errors. ON : If a minor error occurs that prevents printing, the message will appear, and the printer will go offline for 10 seconds before returning online. OFF :
If a minor error occurs that prevents printing, the message will remain on the display and the printer will remain offline until G O is pressed. If the printer is on a network, you will probably want to turn AUTO CONTINUE to ON . JAM RECOVERY= AUTO AUTO ON OFF Determine how the printer behaves when a jam occurs. AUTO : The printer automatically selects the best mode for printer jam recovery (usually ON ). ON : The printer automatically reprints pages after a jam is cleared. OFF : The printer does not reprint pages following a jam. Printing performance might be increased with this setting.
MAINTENANCE MESSAGE=OFF OFF This item appears only after the PERFORM PRINTER MAINTENANCE message appears on the display. OFF : The PERFORM PRINTER MAINTENANCE message will be temporarily cleared but will return after 5 percent of the printer maintenance interval (or after approximately 10,000 pages). The message should be turned off only while waiting for the printer maintenance kit to be installed. If the required maintenance is not performed, the printer’s performance will degrade. PRINT PS ERRORS= OFF OFF ON Select ON to print the PS error page when PS errors occur. EN Chapter 3 Printer operation 67