Table 25. Configuration menu (continued) Item Values Explanation RAM DISK=AUTO OFF AUTO Determine how the RAM disk is configured. This item appears only if there is no optional hard-disk accessory installed and the printer has at least 16 MB of memory. OFF : The RAM disk is disabled. Configure the amount of memory to be used through the following item: RAM DISK SIZE . Note If the setting is changed from OFF to AUTO or from AUTO to OFF , the printer will automatically reinitialize. QUICK COPY JOBS=32 0 to 50 Specifies the number of quick copy jobs that can be stored on the printer’s hard- disk accessory.
HELD JOB TIMEOUT=OFF OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK Sets the amount of time that stored jobs are kept before being automatically deleted from the printer. Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer. Normally, you should not change the printer language (the default is AUTO ). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer. PERSONALITY= AUTO AUTO PCL PS 68 Printer operation EN