Generator This chapter introduces the function of waveform generator. Interface Operation description Press the power button to turn on, and then press the "AWG" button to enter the waveform generator function interface. 1. Set type Press F1 button to select the desired signal waveform, the optional waveform type includes square, triangle, sine, trapezoidal and four arbitrary. 2.
Set frequency Press F2 button to select Frequency , then use the up, down, left and right direction keys to adjust the frequency, press F2 button to open the digital keyboard again, use the up, down, left, right direction keys and "Enter" key to set frequency parameter, select "OK" and press "Enter" button to confirm. 3. Set amplitude Press F3 button to select Amplitude , then use the up, down, left and right direction 22