Trigger Input Measurement General Specifications Display Power Supply Environmental 32 Type Edge Mode Auto, Normal, single Level ±4 divisions from center of screen Trigger Level Accuracy 0.2div × volts/div within ±4 divisions from center of screen Slope Rising, Falling, Rising & Falling Source CH1, CH2 Coupling DC, AC or GND Input Impedance, DC coupled 25pF±3 pF，1MΩ±2% Probe Attenuation 1X, 10X Supported Probe Attenuation Factors 1X, 10X, 100X, 1000X Input Protection Voltage 150V RMS Cursor Voltage difference between cursors: △V Time difference between cursors:
△T Automatic Measurements Frequency, Amplitude Display Type 2.8 inch 64K color TFT Display Resolution 320 horizontal by 240 vertical pixels Display Contrast Adjustable Supply Voltage 100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A Power Consumption Fuse T, 3A Battery 2600mAh*2 Operating Temperature 0℃ to 50℃ Storage Temperature -20℃ to 60℃ Humidity ≤+104℉(≤+40°C): ≤90% relative humidity 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity Cooling Method Convection Altitude Operating and Nonoperating 3,000m (10,000 feet) Random Vibration 0.31g from 50Hz to 500Hz, RMS 10 minutes on each axis Nonoperating 2.46g from 5Hz to 500Hz, 10 RMS