Tooling INDICATOR CARRIAGE STOP The micrometer carriage stop is a useful accessory when producing parts with exact shoulder lengths or when faCing to close tolerances. The indicator reads in -0005 " increments. The micrometer reads in -001 ". Each HlV-H lathe is machined for direct application of the indicator stop. STEADY REST Long cylindrical work held between centres reqUires a steady rest to prevent such work from springing away from a cutting tool. A steady rest is also used when there are machining operations to he performed on the end of work which prohibits the use ofthe tailstock centre. The three jaws are adjustable and have an accurate fit in the milled gUides of the body.
The top section is hinged to provide ease in loading shoulder work without disturbing the setting of the Jaws. The steady rest has a maximum capacity of 3-. FOLLOW REST When you have work that is small in diameter in relation to le~gth it may spring away from the cutting tool. In such cases, the follow rest applied to the carriage, as shown, will assure you of accurate work. 20