Hazardous situations 2 Open and close the driver door once. 3 Press and hold the hazard lights warning switch for 9 seconds, until the warning lights on the driver display turns on. 4 Shift to N and release the electronic parking brake. 5 Once the car has been pulled onto the flatbed truck, engage the electronic parking brake, and exit tow mode. There is also a tow mode tutorial. To view tow mode tutorial, navigate to - Safety & security - Services . To exit tow mode: ■ Enter P and lock the car from the outside. If you have ever accidentally entered tow mode, you can exit tow mode as follows: ■ Shift to D or R . The car must only be towed with all four wheels off the ground.
Only the options shown in the image are valid towing options; with the car on a flatbed truck or with lifted front wheels and the rear wheels on a dolly. Make sure the wheels cannot rotate during the towing procedure. Note: If the 12 V battery does not have power, the car cannot be put in tow mode or shifted to N . In this case, the 12 V battery should be jumpstarted before the car can be towed. Use the towing eyelet Before pulling the car onto a flatbed truck, the car must be put in tow mode. Tow mode is only used when pulling the car onto a flatbed truck. Warning! ■ Make sure that the towing eyelet is tightened all the way before using it to tow the car.
Failure to do so could lead to the towing eyelet coming loose, which could lead to car damage, serious injury, or death. To enter tow mode and tow the car: 1 Make sure the key is in the car. If it is an NFC key, place it on the induction area of the wireless charging pad. 33