Parameter setting method EN 7 Parameter setting method Parameters can be set via the numeric keypad or the knob with the arrow keys to complete. 7.1 Numeric keypad The numeric keypad consists of the following parts: 1. Number keys 2. Decimal point Number keys 0 to 9 are used to directly enter the desired parameter values. Press the key to insert a decimal point at the current cursor. 3. Sign key The sign key "+/ -" is used to change the sign of the parameter. When first pressing the key, the sign is "-". When pressing the key again, the sign switches to "+". 7.2 Arrow keys and the knob Arrow keys:
When inputting parameters, the arrow keys are used to move the cursor to select the currently edited bit. When editing the file name, the arrow keys are used to move the cursor position. HDG3000C Quick Guide Copyright © Qingdao Hantek Electronics Co., LTD 14