Shift Counter Shift Counter 8.5 Programming the Shift Counter Function Codes Programming Change func Save and change Return to dis Function code F1, Display Row 1 : mode tion setting to next function play mode + or Keep pressed and simultaneously press press press turn Voltage On Alternative dis play of Function codes + The function codes are displayed as text in row 1. By pressing both keys simultaneously you can change to the numerical display (F 0 to F 35). After pressing these keys once again the number of the selectable op tions will be displayed in addition. This setting will be stored. Function code F3, Display Row 1 :
PNP/ NPN-Lo gic 0 NPN 8 V-Level 1* PNP 8 V-Level Function code F0, Display Row 1 : 2 NPN TTL-Level Function No. Display Row 2 Factory Setting (Defaults) 3 PNP TTL-Level 0* No function 1 All function codes are set to the va lues marked with * Function code F4, Display Row 1 : Input Attenuat. 0 30 Hz damping (attenuation); e.g. for mechanical contacts 1* F max. (see chapter 4 and 10) 86 87 Input A Counter mode of 0 Adding Operation 1* Adding Input B Subtractin Input C g Reset Adding Reset