Remove the models Let the solution drain off of the models for a few minutes then remove the models, wash off any remaining solution and dry with a clean cloth or paper towel. Other information Progress LEDs When the cleaning cycle is started, all the progress LEDs are illuminated in yellow. Each progress LED from right to left will turn off as the cycle time pro- gresses. When the cleaning cycle is complete, the left-hand progress LED will turn from yellow to green. Cycle complete Canceling the cleaning cycle To cancel the cleaning cycle at anytime, press the cancel button on the con- trol panel. The system will stop and drain the cleaning tank.
Before the sys- tem completely turns off, the cleaning tank may refill with water for a final rinse (depending on where the system is in the cleaning cycle) and then drains again. After the cleaning tank has drained, the lid unlocks so the model basket can be removed. The drained solution cannot be reused. Mod- els may not be fully cleaned if you cancel the operation. 15