HiPhi Shrike Mk4 & Mk5 Hard-Wired Exploder Manual (EN)

Shrike Mk4 & Mk5 Multiple circuit hard-wired exploder Shrike is a hard-wired exploder, currently in service with more than 50 countries worldwide. It can be used to initiate both electric and shock tube detonators. From the arctic to the tropics; Shrike has proven itself as a safe, reliable and cost-effective system for the initiation of explosives, mines, pyrotechnics and other Electro-Explosive Devices (EED). FEATURES Easy to use Shrike has an intuitive, easy-to-use interface that gives operators confidence in its operations. Shock Tube option A Shock Tube Adaptor is available, this offers a simple means of adding Shock Tube (or Nonel) initation capability.

The adaptor is simply inserted into the desired output terminals. The exploder is then simply operated in the same way as for wired connected detonation circuits. Multiple circuits Shrike can initiate four independent circuits. Compatible with a wide range of detonators Shrike is available in two variants to accomodate different types of detonators. The Shrike Mk4 exploder is designed for use with Group 2 safety detonators, which requires a higher energy firing output. The Shrike Mk5 exploder is for use with standard NATO (Group 1) type detonators. MORE ABOUT SHRIKE Shrike has a number of built-in safety features..

It cannot be fired into the external load unless a minimum firing voltage is present on the firing capacitors. The external load must be less than a preset value and after PRIMING, the user must press two independent buttons to discharge the energy into the selected external load. To minimise electrical hazards to the user, the exploder will not fire if the electrical resistance of the external load connected to the terminals is too high. The exploder ensures that output energy cannot be released into a circuit where the resistance is more than the output inhibit level set for the device.

Стр. 1

ORDERING Shrike Mk4 - Body Only Stock Number: 800-0228 NSN: 1375-99-865-4177 Shrike Mk5 - Body Only (L3A3) Stock Number: 800-0221 NSN: 1375-99-895-7682 Standard NiMH Rechargeable Battery (Mk5 Only) NSN: 6140-99-976-3569 KEY SPECIFICATIONS Stock Number: 800-3236 Heavy Duty NiMH Rechargeable Battery Stock Number: 800-3235 NSN: 6140-99-843-9226 SBC3 Battery Charger (suitable for all standard and heavy duty batteries) Stock Number: 800-3075 NSN: 6130-99-979-9987 Shock Tube Adaptor Stock Number: 800-0752 NSN: 1375-99-282-6919 Fault locating tools (pair of) NiMH BATTERY PARAMETERS Dimensions Standard: 140mm x 95mm x 14mm Heavy Duty: 140mm x 95mm x 32mm Stock Number: 800-0281 NSN:

1375-99-209-6541 Output Voltage (nominal) 14.4V Shrike Mk4/Mk5 Test Meter (STM86) Stock Number: 800-0372 NSN: 1375-99-001-9938 (Mk4) NSN: 1375-99-779-9331 (Mk5) Chemring Technology Solutions Ordnance House, Blackhill Road, Holton Heath, Dorset, BH16 6LW, UK T: +44 (0)1202 628155 • F: +44 (0)1202 620182 www.chemringts.com • info@chemringts.com © Chemring Limited 2019 • All rights reserved This publication is issued to provide outline information only, which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as representation relating to the products or services concerned.

The company reserves the right to alter without notice the specification, design or conditions of supply of any product or service. Shrike V1.3 PARAMETER MK4 MK5 Dimensions (Nominal) 140mm x 95mm x 45mm Weight 420 g (14.8 oz) Case Material Noryl SE100 Finish Non-refelctive drab olive Output Connections 4 pais of Spring Loaded Terminals Controls Push button Operating Temperature Range -40°C to +55°C Storage Temperature Range -55°C to +70°C Output Voltage 800 Volts 400 Volts Output energy (typical) 48 Joules 12 Joules Output load (each circuit) 350 (±10) Ohms 400 (±10) Ohms 85 (±10) Ohms † Arming Time (typical) 6 - 8 seconds 2 - 3 seconds

Стр. 2