Chapter 3 Creating and Editing Programs | DOP-EXIO Series Chapter 3 Creating and Editing Programs Activate HMI-WPLSoft, and then the system will enter into Ladder Diagram Mode as shown as the Fig. 3.1 below. Menu Bar Toolbar Ladder Diagram Editing Area Instruction Editing Area Status Bar Fig. 3.1 Ladder Diagram Mode There is a ladder diagram toolbar shown on the top of the Ladder Diagram Mode window. To create and edit a ladder diagram, the user can click the icon on toolbar directly by the mouse or move the editing block to the proper position and enter instructions. Besides, the user also can press F1 ~ F12 function keys on the keyboard to create and edit the ladder diagram.
Please refer to the following sections for how to create and edit ladder diagram. 3.1 Basic Operation Example: Create the diagram shown below. „ Using the mouse and F1 ~ F12 function keys on the keyboard. Revision March, 2008, Doc. Name: 2007PDD23000014 3-1