Removal and Installation 16. The complete assembly can now be removed by sliding the Ink Cartridge Connector out from the rear of the Left Hand Cover. Installation of Ink Tubes System WARNING When installing the Ink Tubes System it is very important that the Tubes are NOT TWISTED. Make sure that the Tubes are correctly routed at the rear of the Left Cover and before powering On the printer, check again that they are NOT TWISTED. NOTE Do not install NEW Ink Tubes System with Ink Cartridges that indicate Low or Very Low ink levels. NOTE Before installing the new Ink Tubes System, make sure that the Ink Type (Dye or UV) of the Tubes is the same as the ones that you are replacing.
8-30 HP DesignJet 5000 and 5500 Series Printers Service Manual