Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 16 of 510 Part # Part Name Type Description Page 0901586 FRM,AC-RELAY,N Elec This is the AC Relay that is located in the main electronics box. There are multiple instances in the printer; this FRM is for qty. 1 page 382 0901594 FRM,LAMP,GLASS,N Carr This is the quartz lamp glass that inserts below the left or right lamp housing. Common to 500-700, FB950, H-Series. page 255 0901596 FRM,FAN,UV LAMP,N _ Carr This is the cooling fan which is used in the lamp assembly. Each lamp has quantity 2. This part number replaces 0500164.
page 256 0901599 FRM,ASSY,FAN,N Encl This is the fan which is used on the top enclosure and end enclo- sures for FB500, FB700, also H-Series. There are multiple instances on each printer; this FRM is for qty. 1 0970811 FRM,MTR,CARRDRV,SFEM XABCDHIJ ROHS Carr Drv Carriage-drive motor only. page 261 CH104-67002 FRM,N,PUMP,PRESSURE OHS This pressure pump is for the ink delivery system (IDS) vacuum/ pressure system. It is located on the OHS assembly. CH154-00009 BRKT,RAIL,ANA- CONDA,IONIZER Med Drv This bracket attaches the ionizer bar to the back of the rail. It is used on the FB500 and the FB950. Multiple instances are used on the respective printer platforms; this FRM is for qty.
1 CH154-50005 ASSY,CBL,ANA- CONDA,SHOP VAC EXT, _ _ 15FT Elec This is the AC power cable from the electronics assembly to the ser- vice station ShopVac. Commonly used in the 500-700, and the FB950. CH154-60027 ASSY,PIGTAIL,OHS,ANA- CONDA,1.75IN DIA FLT _ _ OHS This is the replacement "pigtail" tubing/filter/connector assembly found on the 3-Liter CMYK-LtC-LtM ink cartridges (ink boxes). Com- monly used in the 500-700 and the FB950. CH154-67005 FRM,ENCDR STRIP ACTU _ _ ATOR,Q Med Drv Lifting encoder strip assembly, including bracket, used in all lifting assemblies and service station on the FB950, and all lifting assem- blies but the service station FB500 and FB700.
For the equivalent service station part in FB500/700, see CQ114-67083. page 294 CH154-67006 FRM,READER,ENCDR,ACT UATOR,Q Med Drv This is the encoder reader board assembly used at all of the lifting positions on the FB950 and FB500 and FB700 printer. This includes the board only, no metal bracket included. page 294 CH154-67008 FRM,MEDIA MTR/ _ REDCR,Q Med Drv This is the media drive motor/reducer assembly for FB950 and FB500 and FB700. It is not the same as the one used on the FB910. page 283 CH154-67009 FRM,CBL,UV LAMP,5.3M, _ Q Carr This is the UV lamp power cable in the track from electronics assembly to one lamp. Two cables are used per printer; this FRM is for qty. 1.
Commonly used in the 500-700, and FB950. page 425 CH154-67012 FRM,ENCLOSURE WIND _ OW,Q Encl This is the replacement UV-blocking windows used only on the cen- ter output-side door. includes push nuts. Commonly used in the 500-700 and the FB950. See CQ114-67090 for input-side win- dows. CH154-67014 FRM,BOT- TLE,UV WASTE,Q _ OHS This is the 1-gallon bottle with warning label for collection of UV liquid wastes. page 212 CH154-67015 FRM,BOTTLE,FLUSH,Q Misc This is the squeeze bottle with label for UV flush. CH154-67023 FRM,TUBE,VAC- UUM,LONG,Q Track Long tube for ink-system vacuum that runs through the track assy. Common to 500-700, FB950. page 420