◆ If the voltage is greater than 15.0V (for 6V system, the voltage is greater than 7.50V; for 24V system, the voltage is greater than 30.00V), please check the voltage regulator. ◆ If the voltage is less than 13.3V (for 6V system, the voltage is less than 6.6V; for 24V system, the voltage is less than 26.60V), please check the connection point, wire and dynamotor. 5.6 Print Test Report HT2018C battery tester has the kinetic energy to print test report, for recording and checking test results. You need to connect with the Bluetooth printer to the tester for print. Note: Bluetooth printer is optional, the user can purchase from our company or find other ways to buy.
The matching printer models are: XINYE XP-58IIH Bluetooth printer and Hejie XM- NAP-1 CB58B Bluetooth printer. Operation: 1) After the instrument test in battery startup test, the screen stays at the following interface. RESULT GOOD 12.87 V 588 CCA 100% 4.75 mΩ SOH 100 % 2) Now press the middle button to enter the inquiry “Print the test report?” Press the button to print or press the button to exit.
HT2018B(C) Battery System Tester 12 Data reference table (12V system) status Battery voltage engine performance No headlight and air cooler (need to step on the accelerator to test) Above 13.5 Normal 13.2~13.5 Common 13.0~13.2 Attention Below 13 Need to examine and repair immediately Turn on headlight and air conditioner (need to step on the accelerator to test) 13.4~14.6 Normal 13.2~13.4 Common, attention Below 13.2 Need to examine and repair immediately The above data are for reference. If there is any problem of battery, the data will also be affected.