Function introduction EN Switch the hardness scale, including Leeb (HL), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA), Vickers (HV) and Shore (HS). 6 Current measured value 7 Times of measurement/total times of measurement When the number of measurements reaches the set number, the average value changes from white to green. 5.2 System settings After the instrument is started and enter the , press the System button to enter the . On the System page, language, sound, backlight brightness, backlight time, automatic shutdown, date and time can be set. Table 5 System menu functions 5.3 Measurement Select Measure in the main interface to enter the interface.
HT360 series user manual Copyright©Qingdao Hantek Electronics Co.,LTD 24 Function Settings Description Chinese Language Set the menu language. English Backlight 1-10 Set the screen backlight brightness. 30s 60s Set the backlight time of the screen. The screen BL time 90s backlight will be dimmed within a specified time if no 120s key is operated. OFF 5min Set the automatic shutdown time. The instrument will 10min APO Time automatically shut down within the specified time if no 30min key is not operated. OFF ON Beeper Turn key sound on or off. OFF When the battery is removed, the time and date will Date Time - - return to their original values.
Function Settings Description Direction Downward Inclined dowm Horizontal Select the direction of impact. CLB climb Upward Set the average number of times. When the Times 1-32 number of measurements reaches the Direction