Function introduction EN Table 51 Measurement menu functions 5.4 Save Select Save in the main interface to enter the interface. There are 10 storage groups in total. Each storage group can store 50 data, and a total of 500 data can be stored. Copyright©Qingdao Hantek Electronics Co.,LTD HT360 series user manual 25 Function Settings Description average number, the average value is displayed in green. Continue measuring will result in recount. (Cast）Steel CWT. steel Stainless steel Grey cast iron Ductile iron Switch the type of material being Material Cast aluminum alloy measured.
Copper zinc alloy Copper tin alloy Pure copper Forged steel HL HB HRB Scale HRC Change the hardness scale HRA HV HS Function Settings Description When automatic storage is on, the measured values will be automatically stored in the selected storage group after each measurement, and each storage group can store 50 data. When the current storage ON group is full, the instrument will remind you to switch to Auto Save OFF the next storage group. When the automatic storage is off, after a measurement is completed, press to save the measured value, otherwise the measured value will not be saved. After each measurement, the data is stored in this Store Set 1-10 storage group.
Browse Set 1-10 Select a group to browse data. Delete Set 1-10 Select a group to delete data.