EN Function introduction Table 5.1 Channel configuration descriptions Function menu Description: Table 5.2 Function menu descriptions 5.4 System settings All settings on the page will be automatically saved at shutdown and loaded automatically at next startup. Press to enter the page. 5.4.1 User Press > User to enter the page, use the up or down arrow buttons to select the corresponding function, and then press the Edit button to change the corresponding settings.
Copyright Qingdao Hantek Electronics Co., LTD HTM200 user manual 25 Configuration item Descriptions temperature is below the lower limit, the color of the temperature values on the page will turn red, and a buzzer alarm will be sounded. The lower limit value ranges from -200 ° C to 2480 ° C. Revised value Allows the user to modify the temperature of each channel. The available value ranges from -99.9 ° C to 999.9 ° C. Menu item Descriptions Edit Edit the parameter of the selected configuration item. Reset Restore the parameter of the selected configuration item to its initial values. Flip up/down Turn the page. Return Exit the page and return to the page.